Let’s talk
All procurement guides

Custom vanity project

From a Bathroom Rendering to a Custom Stone Vanity

Finished dark red double stone vanity photographed at the factory
The finished custom stone vanity at the factory, before packing.

A rendering can make a custom vanity look like a done deal. Then come the practical questions: Where do the basins go? What will the real stone look like? And how do you check it before it leaves the factory? Here’s how we worked through those questions on a double stone vanity for an overseas designer.

Planning your own vanity? Jump to the ordering guide.

Product visualization. An animated preview of the vanity, showing the stone veining and how the drawers open.

The rendering set the mood. The measurements got us started.

Two arched mirrors, a deep red double vanity, and pale veins doing most of the decorating: that was the picture an overseas designer sent us. Along with it came the dimensions and stone requirements. Now we had both a look to aim for and something to measure against.

Designer’s bathroom rendering with a dark red double stone vanity beneath two arched mirrors
The designer’s original bathroom rendering. This was the starting point for the vanity.

Where do the basins and drawers actually go?

This is where the shop drawings earn their keep. We took the designer’s dimensions and drew out the basin positions, drawer fronts, and the curve where the two sides meet. With the details on paper, the designer could review them before we moved on to the stone.

Excerpt from Jochan’s production drawing showing the vanity plan, front elevation and section details
Excerpt from our shop drawings, showing how the vanity layout and details were set out for production.

Then came the fun part: seeing the stone

Scroll from the rendering to the raw block and you can see why this step matters. The rendering gave us a color to aim for. The photos let the designer see the actual deep reds and pale veins. Once the designer approved both the drawings and the stone, the factory got to work.

Side view of a dark red raw stone block
A side view of the raw stone during material selection.
Close view of dark red stone with light veins on the exposed surface
A closer look at the color and veining.
Wider view of the dark red stone block during selection
The stone block seen from a wider angle.

And there it was, on the workshop floor

From the front, you can pick out the curved center and paired basins from the rendering. Move around to the side and the workshop light brings out warmer reds and browns in the stone. Wondering what it looks like with a drawer open? We filmed that, too.

Factory photo of the finished dark red stone double vanity
Finished vanity at the factory, before packing.
Angled factory photo showing the finished red stone vanity and its left side panel
The side angle shows the depth of the vanity and the veining on the end panel.
Straight-on factory photo of the custom stone vanity with four drawer fronts
Straight-on view of the four drawer fronts.

One more look before it goes into a crate

A still photo can show the veining. It can’t show you how a drawer opens. After production, the factory inspected the vanity and carried out a water leak test. We sent the owner photos and short clips so they could see the finished piece and review the checks from a distance.

Drawer operation. Factory footage showing the drawer opening and its interior.
Water leak test, clip 1. A short factory clip showing the basin and the area below it.
Water leak test, clip 2. An additional view recorded during the factory check.

What’s hiding inside that wooden crate?

Once the owner gave us the go-ahead, we started packing. This is the part you rarely see in a finished bathroom photo. Look closely and you’ll spot the foam lining, the wooden support under the center of the vanity, and the braces across the top.

Stone double vanity in a foam-lined wooden crate, with an arrow pointing to the support underneath
Inside the open crate, foam lines the sides and base. The arrow points to the wooden support under the center of the vanity.
Front of the stone vanity covered with foam sheeting and held in place with black straps
Foam sheeting covers the vanity, and black straps hold it in place before the crate is closed.
Open wooden crate showing foam padding, a black strap, and wooden cross braces
A look inside the crate before closing: foam padding, a securing strap, and wooden braces across the top.
Closed wooden shipping crate with black straps, lifting slings, and a red Fragile label
The closed wooden crate with exterior straps, lifting slings, and a visible Fragile label.

Once the crate was closed and labeled, we delivered it to the warehouse the owner had designated. We shared photos and videos along the way so the people making decisions could follow the work without being at the factory.

How to Order a Custom Stone Bathroom Vanity from Jochan

You don’t need shop drawings to get started. Send us what you have and tell us what you’re still deciding.

  1. Send your project brief. A rendering, sketch, or reference photo is enough to start. Include the available width, depth, and height, whether you want one basin or two, and any stone preferences. Add your target date and delivery city or warehouse if known. Flag any measurements you still need to check.
  2. Review the quote and confirm your order. Discuss what’s included, the estimated schedule, and where the vanity needs to go. Confirm pricing, payment terms, and any paperwork needed to place your order.
  3. Approve the shop drawings and stone. Check dimensions, basin positions, and drawer layout on the drawings, then review the proposed stone. On this project, the factory started production after both approvals.
  4. Review the finished vanity before packing. We share factory photos and videos so you can see what was made. For this project, that included drawer operation and water leak test footage.
  5. Give the go-ahead for packing and delivery. Confirm the receiving address and who will accept delivery. Once the owner approved this vanity, we packed it and delivered it to their designated warehouse.